Brccee AC 2 Pcs Blood Pressure Bulb Pump Replacement, Healthy Sphygmomanometer PVC Adjustable Pump Bulb Rubber Blood Tester, Black

I purchased some seat covers for my work truck in 2016, which had an inflatable lumbar panel for the driver's side, which worked great for many years... until it didn't.The original bulb eventually started getting sticky and hard, with small cracks around it that leaked air. I was able to carefully continue using it by quickly closing the screw valve to retain the air pressure, but air would still leak out. I couldn't figure out where to find a replacement pressure bulb until I found this listing on Amazon, at a decent price for two of them.By the time these arrived, my old bulb literally disintegrated into multiple pieces, and the new bulb mounted on the existing hose quickly. The problem I ran into is there appears to be a small and slow leak somewhere within the lumbar bladder, where the hose connects, or another spot well before the bulb.Even though the lumbar panel doesn't stay pumped up now, this has nothing to do with the infaltion bulb, which works perfect, and I've got to figure out whether it's worth it or not to either try to remove my seat covers to repair this properly, or just replace the seat covers altogether.The bulbs work great for uses other than a blood pressure cuff. Buy them if you need one or more.

I got these to use on a DIY small engine cylinder leak down kit. They worked perfect and have enough barb to allow me to add clamps or zip ties to enforce the strength and make them 100% leak proof. I've used these up to 12 lbs of pressure for over 30 min at a time and they have not leaked a bit. These will most certainly hold up for your every day blood pressure cuff! Excellent quality at a very affordable price....and it comes with 2 pieces!!

Worked great for my car opening airbags

These bulbs replaced a vulcanized latex rubber one from a blood pressure kit 40 years old. They work fine, and hopefully will get this kit to the century mark. They past pressure and valve tests. They look almost the same as the original, just shinier.

This worked as a direct replacement for a $90 inflatable neck traction unit that works great other than the rubber bulb cracking after becoming brittle from age. My only beef was having to buy two at once, since I’ll not likely need a second one anytime soon.

This is for a replacement bulb on a blood pressure cuff. I used to repair pieces of non medical tools and they worked great. Happy with purchase and price. My equipment is repaired.

The rubber bulbs were good enough, but the metal valves did not close to stop the air flow. They screwed down, but air leaked out. They was no flow control at all. Even when closed air leaked by, and when cracked open, it dumped all the air out. This was my problem initally, and wanted to get new ones to fix that problem.That was the problem with them both. i was surprised they both failed, but they did.I kept the bulbs and trashed the valves, which is the part I really wanted. The valves it appears were never seated or checked to see if they really worked. I'm glad they didn't cost much. At least I salvaged the bulbs. Maybe your luck will be better than mine.

they work but are smaller than normal