COOLWEST Motion Sensor Switch DC 5-24V 5A LED Strip Light Human Induction Detector with Time Adjustable DC power plug - White [Energy Class A]

Wanted some sort of a switch to automate the led strip lights for the oak cabinet we bought recently.Package Content:1x  USB LED motion sensor switch 1x 2 sided tape1x screwI bouthg the USB LED motion sensor switch to connect the  Warm White USB LED Strip Lights  that I installed in the cabinet. The length of the USB cable was slightly smaller from the power plug to the under cabinet where it’s been installed. Since I had a spare male-female usb cable I attached the female section of the usb connector the male section of the sensor switch and the male usb connection straight in to the usb power plug I had it from one of my old mobile phone.The sensor switch is installed under the side of the cabinet leg so it is not visible at all. So now when I walk close to the cabinet the light comes up automatically and goes off after 15 seconds - i haven't made any changes to the default settings at all as I am happy when it gets powered off. So pleased to find a solution and i don't have to bend down to power on/off the lights manually. Automation is the way forward :).With regards to the lux the place where its installed in my house gets natural light straight from the window so it doesn’t get activated when its bright, when it stars getting darker and I walk around 0-5 meters it gets activated.

There are sensors like this available from eBay with the same or better functionality. I've noticed a lot of people don't like buying from a typical Chinese reseller or other supplier outside of the UK. If you're one of these people, this would be the option you'd go for...Personally I don't see a problem buying from China but I needed this quickly so I paid a premium and got it next day on Amazon.I initially thought that this sensor DIDN'T have a lux sensor, however I was mistaken: the lux sensor will stop the LED strip coming on if there's daylight available. The lux sensor on this item is set quite high and isn't adjustable, so unless it's very bright daylight it will always turn your LED strip on.Other than the lux (day / night) feature being quite high, this is a good sensor. It's simple to attach, it takes a standard centre positive power jack and connects to most standard LED strings with no problems.I haven't tried on anything above 12v, but it works down to 5 v.Sensor range is very good at well over 5m and the detect angle is at LEAST 100 degrees on mine, so you don't need to be face on to the sensor to be detected.If you don't mind the price and the fact it simply switch on whatever you've attached to it, pretty much regardless of ambient light levels, it's worth a look, certainly of you want it quickly and have Amazon Prime.

Item was cheap enough and small enough to hide effectively, but motion and light detection was hit and miss. Wouldn't detect motion in one direction, at night it activated every 6 seconds. Not great over all.

I did previous review and I was wrong. It is working but only with led strip... if you try to connect to different led there is resistance load wrong on them and every time after switching off circut go back to original voltge and trigger sensor again. With normal led strip it's working fine. Other thing this sensors re sensitive to temeperature/light during warm day they didnt work but after night come it's working perfectly.

Didn’t work. Used it to connect a 12v DC led strip but it stayed switched on permanently.

Both of the two I purchased have failed and stay permanently on regardless of using the adjustable setting. One setting adjuster simply fell out the first moment I tried to turn it!!

Doesn't work, just stays on constantly, I wondered if maybe the input and outputs were mislabeled, so I popped the case open but it was correct, unless the marking on the board were wrong too.

Still to try but looks ok

Der Bewegungsmelder funktioniert einwandfrei und zuverlässig. Sehr gut gefällt mir, dass man ihn einstellen kann, wie man es benötigt :)Kaufe ihn wieder, wenn ich nochmal so etwas benötige.

Despues de tenerlos instalados las luces quedan encendidas permanentemente por mucho que ajustes el tornillo regulador del tiempo. Me ha pasado con los dos que compré

Le module fonctionne, mais il est contenu dans une pochette plastique souple. La livraison est sous enveloppe cartonnée. Résultat, le dôme plastique arrive enfoncé. Ce qui n'est pas satisfaisant, c'est que la durée maximale d'allumage (réglage au maximum) est inférieure à 90s.Dommage, car par ailleurs le produit est intéressant

Deco. Bien, conjugué.