LET'S RESINEpoxy Resin Kit,1 Gallon Bubble Free & Crystal Clear Epoxy Resin for Table Top, Casting, DIY, Art, Molds,Jewelry

This is a clear low viscosity epoxy resin with a long pot life and about 24 to 36 hour full hardening time. I was careful to mix parts A and B one to one by volume and never had a problem with it curing hard, although it remains rubbery to semi-rubbery for a long enough time to give you some doubts if it is the first time you are using it. After fully curing, it remains perfectly transparent and can be worked with files or metal cutters and scrapers and behaves just like plastic in that regard. The low viscosity combined with long pot life ( I went as long as an hour or so) means you can vacuum out-gas after mixing and dispense from a syringe if needed without rushing. Since I vacuum out-gassed I never had a problem with bubbles during curing, but the low viscosity should allow bubbles to rise easily to be popped with a heat gun even if you do not out-gas.

Arrived well packaged and in excellent condition Great starter pack. I've had no problems using this resin. All my projects have turned out pretty good. Very pleased with this purchase.

Best epoxy I’ve used so far and if you follow the instructions as well as watch a few videos for tips, it will definitely turn out perfect.

I have been using this resin for a few months. I love it! It has cured great for me every time. Color comes out clear every time. As long as you stick to the 1:1 ratio it works easily.

Okay so, this resin DOES HAVE BUBBLES! Almost all resin has bubbles, just be sure you stir them out first. It's nor is curing either and takes a full 24 hours if not longer. Also, they come with pop caps inside. Please mark A from B tops because I didn't and accidentally put the opposite on and they cured shut due to the mixup of resin parts on the lids! Unbelievable that I did that, but they aren't marked so make sure you do that! Comes with no gloves, cups, sticks nothing! Just resin. You'll have to buy those things separately. Made all kinds of little pyramid crystals, letters, bangles and more! Pro tip for the ladies with long hair, please clip it up or tie a bun. My hair fell Into the resin and I thought I would have to cut it off! If you do get it in, use a copious amount of Vaseline or any thick oil or lotion to quickly comb it out. Wash it alot and come it with a fine tooth comb constantly. Works for skin too Hope that doesn't happen to you tho, so be careful! Quality is good, easy to mix with the right stick, and dries pretty clear.

Why did you pick this product vs others?:Let's Resin is a quality product. You will get the best out of it for your projects.

Good

Let’s Resin is my favorite resin, it blends easily, releases bubbles and dries crystal clear.