🚘 Illuminate your ride with style and precision—don’t just drive, dominate the road!
DNA Motoring HL-OEM-SIE99-4P-CH-AM Chrome Amber Headlights are a direct-fit upgrade for 1999-2007 Sierra and Yukon trucks, featuring durable polycarbonate lenses and compatibility with 9005/9006 bulbs (not included). This set includes both headlights and bumper lights, delivering a sleek chrome amber look that enhances both style and nighttime visibility. Professional installation recommended.
Brand | DNA MOTORING |
Color | Chrome Amber OEM |
Specific Uses For Product | Head Lights |
Vehicle Service Type | Truck |
Year | 2007 |
Special Feature | High Beam |
Auto Part Position | Front |
Lens Color | Amber |
Lens Material | Polycarbonate |
Item dimensions L x W x H | 18 x 17 x 10 inches |
UPC | 817598025786 |
Assembly Required | No |
Manufacturer | DNA Motoring |
OEM Part Number | 15850351, 15850352, 20556700, 20556800 |
Global Trade Identification Number | 00817598025786 |
Model | DNA Motoring Headlights Compatible with Sierra |
Item Weight | 9.55 pounds |
Product Dimensions | 18 x 17 x 10 inches |
Country of Origin | China |
Item model number | HL-OEM-SIE99-4P-CH-AM |
Exterior | Chrome |
Manufacturer Part Number | HL-OEM-SIE99-4P-CH-AM |
Special Features | High Beam |
P**S
Headlights
Beautiful look, perfect fit
S**R
Very good value, works as intended.
The DRL and turn signal houses fit very well. The headlight housings fit well also. No problems so far. Packaging was sufficient and nothing was broken.
B**N
Do not buy these at any price
I purchased the OEM looking version for those reading this.The only good thing about these is that they look good from 20 feet away.Installation was slightly painful, and I'm experienced in this type of work.The marker light mounting tabs are off by about 1/4 inch on both sides in the opposite direction so the housing does not fit properly within the opening without trimming which would then weaken the already thin material allowing the housing to bounce around on the road.The headlight housing was even worse. In order to get the pins to drop in, I had to adjust the housing fully extended, then readjust after install. What normally takes less than a minute to swap took me 10-15 minutes of putting it in place and adjusting then finally comparing the housing aide by side to OEM and realizing it's manufactured incorrectly.Once installed the marker lights function okay.Once installed the headlights are the worst I've ever seen from any car, ever. The low beam light pattern is not consistent and has verticle lines disrupting the pattern. The high beams look good but are pointed at the same angle as the low beams, which makes them useless.I am returning these and buying legitimate OEM housings. Save yourself time and avoid these at all costs. Even if these were free, I would not waste my time with them.
R**L
Mixed review
They look fine when they are installed but the build quality seems a little sketchy. The low price makes it hard to be overly concerned. I’m guessing they’ll last two to three years.
D**D
Fit is good.
Fit well for my 2002 Yukon. Took it to the shop. No fuss.
D**I
Good.
FYI the lower marker light fixture will not fit a Denali.Headlights arrived mechanically fine. However drivers side LED surround was dead out of the box. Check before wiring in. I had already crimped the wires, and since my original passenger side was already broken, and I needed something. Not returning. LED surround not vital. Though I will likely replace on my own dime.EDIT: Well I should have checked this. LED surround wasn't dead. PO had swapped wiring at some point. I should have spotted that. So this item was fine all around.For those complaining about the stem breaking. That's a GM design problem. This items actually help to alleviate this by using less brittle plastic, and having a ball joint that can give. So don't complain about this on aftermarket replacements. that is an OEM design flaw.
H**E
Brand new oem
Looks like brand new OEM lights. I installed these on a 2002 GMC Sierra 2500hd and they look amazing. Makes the truck look brand new. I'm not gonna take away a star but my only thing is I wish it came with rubber garments for the bulbs. Other than that they're awesome!
R**R
several manufacturing issues found
They look nice now that they're in the truck (2004 GMC 1500), but had a variety of issues related to manufacturing errors. Some very sloppy application of the sealant between the lens and the body had to be tidied up, hopefully they won't collect water. Second, in both primary assemblies the clearance for the high beam lamp to fit under it's keeper was too shallow and the fix was to back off the screws on the keeper, insert bulb, and then tighten keeper back down (that, or mill the seats) - in addition, one of the keepers appeared to be incorrect - I think it may have been a low beam keeper installed in the wrong location as it interfered with the stop tab (that insures proper rotation of lamp when installed) cast in the body of the assembly. Also, it was fickle to get the assemblies back in the truck. For the running/turn assemblies I needed to shave/file a little thickness off the locating pins as they would have broken if forced into their seats. For the main lights, alignment of the pins securing the assemblies required extending the aiming mechanismes to near max to get the clearance and alignment (with a little flex) to line up for dropping in pins, then reaiming lights. From prior reviews I half expected to be doing some mods to make these work - and for someone handy there was nothing here that couldn't be over come - but if you're a klutz, or don't have tools, or a dry warm place to work, pay more for a set that don't have these sort of issues.
Trustpilot
1 month ago
1 month ago